|
| Contact |
MegaBit Gear CE/3 |
MegaBit Gear TE/3
|
|
Computer networking has dramatically advanced over the past few years according to the popularization of intranets.
But take a look around you. Can you find places that are not yet networked?
If there is a phone line nearby, you can connect such locations to a network today.
CE/3 TE/3 is the ultimate solution to your networking needs! |
|
CE/3 TE/3 applies ADSL* technology to LANs, enabling office telephone lines
to become a 10/100Base-TX network several kilometers long.
It allows you to connect to
an LAN computers located more than 100 m (maximum distance for 10/100Base-TX)
from a hub or switch, yet it does not entail the difficulties and expense of
installing fiber optic cable.
CE/3 TE/3 is the ultimate solution for computer
networks on which LAN connection is problematic due to cost and environment
constraints.CE/3 TE/3 is placed between your phone and PBX (Public Branch
Exchange). It is a Plug & Play product requiring no complex setup. Once you
turn on its power, an ADSL connection is automatically established over which
data can be transmitted.CE/3 TE/3's maximum transmission rate for data is
1 Mbps upstream (TE to CE) and 12 Mbps downstream (CE to TE).
And of course, you can still use your telephone while CE/3 TE/3 is
transferring data.Since CE/3 TE/3 was designed from the outset to connect to
LANs, we provided it with an Ethernet interface and a bridging function.
* Asymmetric Digital Subscriber Line |
|
| Old Configuration |
New Configuration |
 |
|
 |
 |
 |
 |
|
|
Builds a Computer Network Between Buildings at a Plant
Laying Ethernet cable inside and outside can be a formidable task. That is why many PCs are never linked to a network. CE/3 TE/3 solves this problem by networking PCs, no matter where they are located, over telephone lines. |
Creates Networks at Public Buildings and Expositions
Although there is a great demand for setting up computer networks linking reception desks, temporary facilities, and locations outside of the office, laying the cable for such networks is no easy task. CE/3 TE/3 offers a simple network solution using the telephone lines at hand. |
|
|
|
|
|
 |
|
 |
|
|
Connects Computers to Telephone Lines at Construction Sites
Computer networks are effective for sharing procedures and blueprints at construction sites and offices. The high-speed communication capabilities of CE/3 TE/3 which can use temporarily installed telephone lines is ideal for such situations. It can markedly improve cooperative work between people on and off the construction site. |
Networks Together Hospital Computers
The use of computers for accounting, administration, and diagnosis is continually increasing. Unfortunately, laying new cable to extend a network generates dust and noise. CE/3 TE/3 enables the building of a network using wiring already in place throughout the facility. |
|
|
|
|
|
|
Plug & Play Product Anyone Can Use Right Out of the Box
As soon as you connect the necessary cables and turn its power on,
CE/3 TE/3's factory settings enable the modem to automatically
check line conditions, set a transmission rate, and start
communication.
The LCD display on the CE/3 TE/3 front panel
always shows the communication status in an easy-to-understand
manner so that you can visually determine how the unit is operating.
By using the display and buttons on the front panel, you can get even
more detailed information. There is no need for special knowledge and
operation know-how concerning networks.
|
|
The Power of DMT for Adjusting Transmission Speed According to Telephone Line State
On ADSL, transmission rate fluctuates dues to various factors
including the quality and length of telephone lines. Even after
establishing a connection by ADSL and commencing communication
at a certain speed, it might occur that the connection may become
difficult to maintain due to noise or other line problems. CE/3 TE/3's solution is to use the special feature of DMT to reset
transmission speed so that communication can be maintained.
|
|
Support for Robust Network Management
In addition to operation management by the end user, CE/3 TE/3 lets you use an SNMP agent when operation management by a network administrator becomes necessary.
|
|
CE/3 TE/3 Ease-of-Use and Simple Configuration
CE/3 TE/3 Ease-of-Use and Simple Configuration
These models are perfect for replacing a legacy PBX modem with an
LAN and using ADSL to extend a relatively small number of 10/100Base-TX interfaces from and single line. Their internal splitters allows you to
keep using your existing analog phones and fax machines. (Combined
usage with telephones may result in slightly degraded voice quality.)
|
|
|
|
Product List
|
|
Name
|
Description
|
| MegaBit Gear CE/3 |
Stand alone modem with internal splitter for center side |
| MegaBit Gear TE/3 |
Stand alone modem with internal splitter for terminal side |
|
|
Specifications
|
- When using with telephones, connect CE/3 TE/3 to two-wire analog telephone lines. Combined use on 4-wire digital lines is not possible.
- Combined usage with telephones may result in slightly degraded voice quality.
- Telephones cannot be used when CE/3 TE/3's power is turned off.
- In response to the line quality at the time it starts up,
CE/3 TE/3 automatically selects and operates under the optimum transmission rate within the range setup in advance (includes factory settings).
- When communication is no
longer possible at the original rate due to line noise or other subsequent problems, CE/3 TE/3' reduces the speed automatically to a level and reconnect. In
addition, you can set an even stronger data error recovery function when needed.
- You can use CE/3 TE/3 even without connecting to a PBX or telephone.
|
|
|
|
to 40
to 90